Back to Posts
Fabrication 11/26/24

Improving the Drill Chart

The Drill Chart is an important table on any fabrication drawing. It provides a legend for the many drill sizes, locations, and attributes desired in a PCB, helping bridge the gap from fabrication drawing requirements to the design data files. While always present in the design, there is one critical characteristic of a drill that is seldom addressed in a Drill Chart.

Annular Ring – Consider adding a column to the Drill Chart that lists the smallest Pad size for each drill size in the design. When adding the smallest pad size, please consider the minimum Annular Ring requirements as defined in IPC 2221 for the Class level desired. This will help communicate to Fabricators without even looking into the data files whether the design supports the minimum Annular Ring required for the build and can be identified as early as the Quote stage, avoiding the order being put On Hold and impacting schedule.

 

DRILL CHART

SYM DRILL SIZE TOLERANCE PLATE QTY PAD
A .008 +.000/-.008 Y 600 .020

More articles

Fabrication 06/23/25

Orbital High Ground—Why Space Superiority Is Slipping Away

“The next war might be won—or lost—22,000 miles above Earth.” That’s not science fiction. It’s the ...

More details
Fabrication 06/17/25

RF & Microwave PCB Design: Navigating High-Frequency Complexity with Precision

RF and microwave PCBs aren’t just signal carriers—they’re performance enablers. In the GHz realm, every ...

More details
Fabrication 06/04/25

How Embedded Heat Sinks Are Advancing PCB Fabrication

Managing localized thermal loads is increasingly critical as power densities rise. One solution to this ...

More details